DIO SM-EXTRA WIDE(RBM) IMPLANT SYSTEMS
DIO Corporation · Model SAS 7845(II) · UDI-DI 08806195925331
Description
The DIO SM Implant System is comprised of dental implant, Superstructure, Instruments for prosthetics and Surgical Instruments The DIO SM Implant System is specially designed for use in dental implant surgery. A successfully osseointegrated implant will achieve a firm implant when surgically implanted under controlled conditions, per well known clinical studies. There are intended for use in partially or fully edentulous mandibles and maxillae, in support of single or multiple-unit restorations. The superstructures consist or screws(Closing Screw, Coping Screw), abutments (Screw retained type, Cemented retainde type, Overdenture retainde type), Solid protect cap. The screws are made of commercial pure titanium, grade 4(ASTM F76) and Ti-6A1-4VELI(ASTM F136) intended to be usedin a narrow tooth gap after implant insertion and to protect exposed top of commercial pure titanium, grade 3 and grade 4(ASTM F76), Ti-6A1-4VELI(ASTM F136), white gold alloy, POM, PMMA. The intentions of each abutment are described in part 2.4. The protect cap is made of POM and intended to protect infecting other substances after solid abutment is fixed on the implant.
Recalls
| Date | Firm | Reason |
|---|---|---|
| 2026-07-13 | Straumann USA LLC | There may be a mismatch between the implant contained inside the packaging and the information described on the outer carton label. If the the incorrect implant is installed, the i |
| 2026-03-27 | Straumann USA LLC | Includes an incorrect screw seat interface. |
| 2026-03-27 | Straumann USA LLC | Includes an incorrect screw seat interface. |
| 2026-03-17 | Straumann USA LLC | A material mix-up had occurred during the manufacturing of Straumann Custom Abutments. More specifically, a raw material bar of TAN-material (SAP #701924 / Lot 7130439) was incorre |
| 2026-03-17 | Straumann USA LLC | A material mix-up had occurred during the manufacturing of Straumann Custom Abutments. More specifically, a raw material bar of TAN-material (SAP #701924 / Lot 7130439) was incorre |
| 2025-09-30 | Prismatik Dentalcraft, Inc. | Incorrect titanium screw, packaged with dental implant. |
| 2025-06-25 | Preat Corp | Engaging titanium base was manufactured 180 degrees around the post from where it should be located in relation to the connection geometry; if the flat is on the wrong side of the |
| 2025-06-24 | Preat Corp | Due to manufacturing error, digital analog rotational feature is 180 degrees off. |
| 2025-04-17 | Straumann USA LLC | Incorrect blister labelling. |
| 2025-04-02 | Preat Corp | Due to manufacturing issues, abutment products were manufactured with screw seat located too high, which may cause the mating screw to have a shorter engagement length into the ass |
Query this across every FDA database — by API.
Linked GUDID · 510(k)/PMA · MAUDE · recalls · establishments. Free tier, no card required.
Get your free API keyRead the docs